Aritronix Scorpio Guía de usuario descargar pdf (Pagina 3)

a1

Problem Possible Cause Solution

Will not arm

Key pad is locked

Unlock key by holding button 4 for

four seconds

Power or ground not connected

Verify connection to power lead and

ground connection

Turn signals will not

flash

Grey wires from GEN-1 not

connected or connected to wrong

wires

Test wires and change connections

to correct wires

Perimeter Sensor not

working

Sensor not connected Check connections

System activated with wrong button

Activate with button 3 instead of

button 1

Ignition Disable does

not work

Orange wire from GEN-1 not

connected

Connect orange wire from GEN-1 to

12 volt (+) with ignition key on. In

most bikes that is the tail light wire

Ignition disable not connected to

correct wire on bike

Refer to options on the ignition

disable instruction page. Test

selected wire before reconnecting

RID-5 wires.

Troubleshooting guide

2

Transceiver Information

Alarm Triggers 14

Range Confirmation Signal 15

Checking Violation Display 15

Transceiver Battery Information 16

Low Battery Stages 16

Optional Accessories Instructions

Perimeter Sensor (SN 5) 18

Back up Battery 19

Ignition Disable / Anti hijack Unit 20-21

Appendix

Trouble Shooting guide a1

Limited Warranty a2

Important Information / Notes a3

FCC Information a3

Special Note a3

1 2 3 4 5 6 7 8 ... 13 14

Comentarios a estos manuales

Sin comentarios